Fabrication of three-component hydrogen-bonded covalent-organic polymers for ciprofloxacin decontamination from water: adsorption mechanism and modeling

A three-component hydrogen-bonded covalent organic polymer, namely JLUE-H_COP-66, was fabricated via a facile multiple-linking-site solvothermal approach to overcome the weakness of poor function complexity and limited structure diversity of the pure covalent skeletons. The as-prepared JLUE-H_COP-66 polymers were employed to decontaminate ciprofloxacin (CIP), a popular F-quinolones (FQNs) antibiotic, from water and exhibited satisfactory adsorption performance. Specifically, JLUE-H_COP-66 polymers have high adsorption capacity with the maximum contribution of 111.1 mg/g according to the Langmuir model, good antiinterference to NaCl salts, and excellent regeneration property. The pH-dependent experiment results signified the probably dominated mechanism of electrostatic interaction. In addition, adsorption studies and structural characterization in combination illustrated that the pore-filling effect, hydrogen bonding formation might also govern the whole process, accompanied by electrostatic interaction, dipole-dipole complexation, π-π EDA interaction, and hydrophobic-hydrophobic interaction besides. Moreover, electrostatic potentials, as well as the frontier molecular orbital distributions (HOMO and LUMO) of CIP and JLUE-H_COP-66 fragment, were calculated using density functional theory to theoretically support the research. Furthermore, the response surface methodology (RSM) according to the CCD matrix was used to not only study the interactive and cooperative effects of initial CIP concentration, initial pH, ionic strength along with JLUE-H_COP-66 dosage on CIP removal using JLUE-H_COP-66 but also optimize the operation conditions. Given the peculiar structure and functional feature, this work could hopefully bring H_COPs into the practical applications of such challenging and persistent ciprofloxacin potent removal with further large-scale efficiency.     

Antioxidant product analysis of Folium Hibisci Mutabilis

Folium Hibisci Mutabilis, a new member of Chinese Pharmacopoeia, can treat some diseases induced by reactive oxygen species. The study prepared a lyophilized aqueous extract of Folium Hibisci Mutabilis (LAFHM). LAFHM was found to enrich eight flavonoids (i.e., quercetin, luteolin, hyperoside, isoquercitrin, rutin, kaempferol, tiliroside, and vitexin) by HPLC analysis. These flavonoids were further compared using antioxidant assays, where triliroside and vitexin always exhibited higher IC₅₀ values than the others. In ultra-performance liquid chromatography coupled with electrospray ionization quadrupole time-of-flight tandem mass spectrometry analysis, these flavonoids could basically give two characteristic m/z values (226 and 196) and their corresponding double m/z values (i.e., 602, 570, 926, 926, 570, 1186, and 862), when treated by 1,1-diphenyl-2-picryl-hydrazl radical (DPPH^?). Finally, the coupling products of DPPH^?-treated triliroside were investigated using computational chemistry. It was found that the –OH in para-coumaroyl moiety to have the lowest bond disassociation energy among all phenolic -OHs in the triliroside. In conclusion, Folium Hibisci Mutabilis contains the above eight antioxidant flavonoids. Despite of the different antioxidant levels, they can generally produce flavonoid-radical coupling product and flavonoid-flavonoid homodimer during antioxidant process. Especially, tiliroside uses para-coumaroyl as linker to construct a tiliroside-radical coupling product at the meta-carbon atom.     

Enzymatic Extraction of Bioactive and Self‐Assembling Wool Keratin for Biomedical Applications

Keratin is widely recognized as a high‐quality renewable protein resource for biomedical applications. Despite their extensive existence, keratin resources such as feathers, wool, and hair exhibit high stability and mechanical properties because of their high disulfide bond content. Consequently, keratin extraction is challenging and its application is greatly hindered. In this work, a biological extraction strategy is proposed for the preparation of bioactive keratin and the fabrication of self‐assembled keratin hydrogels (KHs). Based on moderate and controlled hydrolysis by keratinase, keratin with a high molecular weight of approximately 45 and 28 kDa that retain its intrinsic bioactivities is obtained. The keratin products show excellent ability to promote cell growth and migration and are conferred with significant antioxidant ability because of their intrinsically high cysteine content. In addition, without the presence of any cross‐linking agent, the extracted keratin can self‐assemble into injectable hydrogels. The KHs exhibit a porous network structure and 3D culture ability, showing potential in promoting wound healing. This enzyme‐driven keratin extraction strategy opens up a new approach for the preparation of keratin that can self‐assemble into injectable hydrogels for biomedical engineering.     

Two novel d10 transition metal complexes based on 1H‐benzimidazole‐5,6‐dicarboxylic acid: Synthesis,structure and multifunctional luminescence detection

Two new coordination complexes based on benzimidazole dicarboxylic acid, Zn(Hbidc)?H₂O ( 1 ) and Cd(Hbidc)(H₂O) ( 2 ), have been synthesized under hydrothermal conditions. The complexes were characterized using elemental analysis, infrared and UV–visible spectroscopies, powder X‐ray diffraction, thermogravimetry and single‐crystal X‐ray diffraction. Structural analyses showed that the crystal structures of 1 and 2 are different, due to the various modes of linking of the benzimidazole dicarboxylic acid. Complex 1 has a two‐dimensional network structure and 2 has a three‐dimensional network structure. In addition, we studied the performance of the fluorescence response of two complexes. Results showed that the complexes can be used as chemical sensors for multifunctional testing, such as for UO₂²⁺, xanthine and Fe³⁺ ions. Even if the concentration is very low, they could also be detected, showing that coordination complexes 1 and 2 have very high fluorescence sensitivity. The detection limit for UO₂²⁺ is 5.42 nM ( 1 ) and 0.02 nM ( 2 ), that for xanthine is 1.37 nM ( 1 ) and 0.28 nM ( 2 ), and that for Fe³⁺ ions is 0.76 nM ( 1 ) and 0.62 nM ( 2 ).     

Pharmacokinetic analysis of plasma bicyclol by liquid chromatography–tandem mass spectrometry

Bicyclol is a synthetic drug widely used to treat chronic hepatitis B. This study aimed to develop a selective, sensitive and high‐throughput liquid chromatography–tandem mass spectrometric method for the detection of bicyclol in human plasma. Bicyclol was detected using a multiple reaction monitoring mode, with ammonium adduct ions (m/z 408.2) as the precursor ion and the [M‐CH₃]⁺ ion (m/z 373.1) subjected to demethylation as the product ion. Chromatographic separation was achieved using a Zobax Eclipse XDB‐C₁₈ column with a gradient elution and a mobile phase of 2 mm ammonium formate and acetonitrile. Bicyclol was extracted from plasma matrix by precipitation. A linear detection response was obtained for bicyclol ranging from 0.500 to 240 ng/mL, and the lower limit of quantification was 0.500 ng/mL. The intra‐ and inter‐day precisions were all ≤7.4%, and the accuracies were within ±6.0%. The extraction recovery was >95.9%, and the matrix effects were between 96.0% and 108%. Bicyclol was found to be unstable in human plasma at room temperature, but the degradation was minimized by conducting sample collection and preparation in an ice bath. The validated method was successfully applied to investigate the pharmacokinetics of bicyclol tablets in six healthy Chinese volunteers.     

Screening gas-phase chemical kinetic models: Collision limit compliance and ultrafast timescales

Detailed gas-phase chemical kinetic models are widely used in combustion research, and many new mechanisms for different fuels and reacting conditions are developed each year. Recent works have highlighted the need for error checking when preparing such models, but a useful community tool to perform such analysis is missing. In this work, we present a simple online tool to screen chemical kinetic mechanisms for bimolecular reactions exceeding collision limits. The tool is implemented on a user-friendly website, cloudflame.kaust.edu.sa, and checks three different classes of bimolecular reactions; (ie, pressure independent, pressure-dependent falloff, and pressure-dependent PLOG). In addition, two other online modules are provided to check thermodynamic properties and transport parameters to help kinetic model developers determine the sources of errors for reactions that are not collision limit compliant. Furthermore, issues related to unphysically fast timescales can remain an issue even if all bimolecular reactions are within collision limits. Therefore, we also present a procedure to screen ultrafast reaction timescales using computational singular perturbation. For demonstration purposes only, three versions of the rigorously developed AramcoMech are screened for collision limit compliance and ultrafast timescales, and recommendations are made for improving the models. Larger models for biodiesel surrogates, tetrahydropyran, and gasoline surrogates are also analyzed for exemplary purposes. Numerical simulations with updated kinetic parameters are presented to show improvements in wall-clock time when resolving ultrafast timescales.     

Necessary and Sufficient Conditions for Qualitative Properties of Infinite Dimensional Linear Programming Problems

Necessary and sufficient conditions for qualitative properties of infinite dimensional linear programing problems such as solvability, duality, and complementary slackness conditions are studied in this article. As illustrations for the results, we investigate the parametric version of Gale’s example.     

Metal-Free,Visible-Light-Induced Selective C−C Bond Cleavage of Cycloalkanones with Molecular Oxygen

A metal-free, visible-light-induced oxidative C−C bond cleavage of cycloketones with molecular oxygen is described. Cooperative Brønsted-acid catalysis and photocatalysis enabled selective C−C bond cleavage of cycloketones to generate an array of γ-, δ- and ϵ-keto esters under very mild conditions. Mechanistic studies indicate that singlet molecular oxygen (¹O₂) is responsible for this transformation.     

N-Doped Graphdiyne Coating for Dendrite-Free Lithium Metal Batteries

Nonuniform nucleation is one of the major reasons for the dendric growth of metallic lithium, which leads to intractable problems in the efficiency, reversibility, and safety in Li-based batteries. To improve the deposition of metallic Li on Cu substrates, herein, a freestanding current collector (NGDY@CuNW) is formed by coating pyridinic nitrogen-doped graphdiyne (NGDY) nanofilms on 3D Cu nanowires (CuNWs). Theoretical predictions reveal that the introduction of nitrogen atoms in the 2D GDY can enhance the binding energy between the Li atom and GDY, therefore improving the lithiophilicity on the surface for uniform lithium nucleation and deposition. Accordingly, the deposited metallic Li on the NGDY@CuNW electrode exhibits a dendrite-free morphology, resulting in significant improvements in terms of the reversibility with a high coulombic efficiency (CE) and a long lifespan at high current density. Our research provides an efficient method to control the surface property of Cu, which also will be instructive for other metal batteries.